Page Title
 |
| |
 |
| |
 |
| |
 |
| |
 |
Apex Mass Flow Meter Full Scale Flow Range 1.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 2.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 5.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 20.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 10.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 1 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 500 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 200 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 100.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 50.0 sccm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 50 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 20 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 10 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 5 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 2 slpm With 30 Gas Library Order
Product Description
Apex Mass Flow Meter can measure 30 gases. One gas should be specified for the
primary gas calibration. A 115V/60Hz power cable is available to power the unit.
The Apex Mass Flow Meter can be set via the 0-5V, 0-10V or 4-20 mamp(Special
Order).For the end user, flows can be read via the on-board display. FlowVision
Software can be purchased for using a computer to record and graph the flows. The
gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be
purchased in the communication cable section. One end is the 9 pin Din connector to
connect to the Apex MFC, while the other end are blank wires.
With any questions, contact us at 770-479-7138 for assistance.
Apex Mass Flow Meter can measure 30 gases. One gas should be specified for the
primary gas calibration. A 115V/60Hz power cable is available to power the unit.
The Apex Mass Flow Meter can be set via the 0-5V, 0-10V or 4-20 mamp(Special
Order).For the end user, flows can be read via the on-board display. FlowVision
Software can be purchased for using a computer to record and graph the flows. The
gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be
purchased in the communication cable section. One end is the 9 pin Din connector to
connect to the Apex MFC, while the other end are blank wires.
With any questions, contact us at 770-479-7138 for assistance.
Apex Mass Flow Meter Full Scale Flow Range 100 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 250 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 500 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 1000 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 1500 slpm With 30 Gas Library Order
Apex Mass Flow Meter Full Scale Flow Range 2000 slpm With 30 Gas Library Order
Buy Apex Mass Flow Controllers Online
Apex Mass Flow Meter Full Scale Flow Range 0.5 sccm With 30 Gas Library Order
DC-61 -Communications Cable 6 ft. DB9 Order
(connect to Controller) to Blank Wires
(connect to Controller) to Blank Wires
DC-62-Communications Cable 6 ft. DB9 Order
(connect to Controller) to DB9 (Connect to BB9 Box)
(connect to Controller) to DB9 (Connect to BB9 Box)
DC-251 -Communications Cable 25 ft. DB9 Order
(connect to Controller) to Blank Wires
(connect to Controller) to Blank Wires
Power Supply Adaptor PVPS24U Universal Plugs Order
Computer Software To Controllers FlowVisionSC Order
RS232 Cable to Connect Computer Order
to BB9 or Controller to Computer MD8DB9
to BB9 or Controller to Computer MD8DB9