|
30 factory installed, user selectable, gas calibrations:
Air
Argon
Methane
Carbon Monoxide
Carbon Dioxide
Ethane
Hydrogen
Helium
Nitrogen
Nitrous Oxide
Neon
Oxygen
Propane
Butane
Ethylene
Iso-Butane
Krypton
Xenon
Sulfur Hexaflouride
75% Argon + 25% C02
90% Argon + 10% C02
92% Argon + 8% C02
98% Argon + 2% C02
75% Argon + 25% Helium
75% Helium + 25% Argon
75% CO2 + 25% Argon
Helistar® A1025
Stargon® CS
Acetylene
Can Your Mass Flow
Controller Control 30 different gases?
The Apex Vacuum Apex X Series Mass Flow Controller
(MFC) is designed for OEM users. The OEM Version has no
display which saves you money. Each Apex Mass Flow
Controller is fully equipped:
-
30 On-Board Gases can can be changed via software or
Windows Hyper-Terminal.
-
Pressure and temperature is measured and displayed
on the display.
-
Ultra fast 100 millisecond to Control (most MFC's
are 2-3 seconds)
-
No Power Supplies or expensive Read Out Units needed
-
Up to 26 Apex MFC's can be controlled through one RS
232 Port
-
FlowVision Software to set and output results
The Apex X Series Mass Flow Controller is the only
choice for very low flows. The Apex X Series can control flows as
low as 0.5 sccm full scale. No other MFC on the market can do this.
Add in our accuracy of 0.2% Full Scale plus 0.8% of
reading provides the best in control and accuracy on the market
today. For all this you pay no more $$$.
There are over 20,000 units in the field today with
this technology.
Apex Mass Flow Controller
Product Literature
Basic Specifications
Apex
Mass Flow Controller Manual
Frequently Asked Questions FAQ
To buy, visit the online store or contact an Apex
Distributor
|
